PDA

View Full Version : Boushh head model


ShodiKGian
04-19-2002, 02:28 AM
I've almost completed the Boushh disguise head model from ROTJ.

If you have any feedback let me know. I am having trouble finding good reference pics, but I've found a few which give some good detail.

http://mason.gmu.edu/~badams4/boushhrender.jpg

After I'm satisfied with this head model, I'll probably move on do doing a Twi'Lek head model (male and female both probably)

CheshireKat
04-19-2002, 03:11 AM
Can probably add alot more detail. Can we see a Front and Side pic? Could tell you alot more then. Aim for about 400 to 500 polys for the head.

From what I can see the proportions are a bit off and the top Brim where the Heart Monitor like line runs acrall seems a bit boxy. The top round area is a bit messy too. I can't tell why it looks like that though from this pic.

It looks like you've got the basic shape down pretty well though. That's one of the worst stages if you ask me.

Keep it up.

ShodiKGian
04-19-2002, 03:43 AM
Thanks for the information about the number of polys to shoot for, that should be helpful.

The proportions on the top part of the helmet are a bit off, as you said, and I'm trying to find some better pictures to use for reference, because I can't quite get a handel on what the proper ones are :)

The round top is something I'm working on now. I'll make it meet up with the flat part with more of a curve.
It'll probably take me a while to get this right, I haven't done modelling in a long time :)

Again, thanks for the input