PDA

View Full Version : 99.9% Accurate Tckmodel.cfg list


keo718
07-30-2002, 03:30 PM
This is probably as accurate a tckmodel list as you'll find. All heights are mathematically calculated (based of Starwars databank data) and rounded off to the nearest tenth. If there are names missing its either because their height is equivalent to the default 1.0 size, I don't use them, or I do not have the model. [Yodas' saber was a guesstimation.]

Also, the last four names listed are for upcoming models. Those need to be replaced with the respective model bot names when the models come out.

"kyle" 1.0 1.0
"desann" 1.35 0
"vader" 1.13 0
"wookiee" 1.27 0
"chewie" 1.27 0
"exarkun_sithii" 1.05 0
"leia" 0.84 0
"boushh" 0.84 0
"lando" 0.99 0
"stormtrooper" 1.01 0
"swamptrooper" 1.01 0
"clonetrooper1" 1.01 0
"clonecommander1" 1.01 0
"reborn" 0.94 0
"monmothma" 0.84 0
"darkyoda" 0.37 0.55
"yoda" 0.37 0.55
"ugnaught" 0.56 0
"maul" 0.98 0
"luke" 0.96 0
"anhluke" 0.96 0
"quigonvm2" 1.08 0
"ep2anakin" 1.03 0
"ep2windu" 1.05 0
"gl_dooku" 1.08 0
"jedi_dooku" 1.08 0
"mc_jarjar" 1.09 0
"gungan" 1.09 0
"jango_fett" 1.01 0
"boba_fett" 1.01 0
"padme" 0.92 0
"cheshire_vader" 1.13 0
"aurra" 0.97 0
"ulic" 0.99 0
"gamorrean" 0.95 0
"aayla" 1.12 0
"lenyavanua" 1.12 0
"sirrya" 1.12 0
"prince_xizor" 1.01 0
"roger" 1.06 0
"4lom" 0.88 0
"c3po" 0.93 0
"ra7" 0.95 0
"tc14" 0.93 0
"ladybrena" 0.94 0

"Ki Adi Mundi" 1.1 0
"Coleman Trebor" 1.19 0
"Darth Sidious" 0.99 0
"Palpatine" 0.96 0

edit: ladybrena is a fictional character and thus has a fictional height.

remark 666
07-30-2002, 08:30 PM
very cool mate, can I please include this in the upcoming (and official) JediMod 1.2 release ?

keo718
07-30-2002, 09:31 PM
No problem, just give me recognition. Is Dest involved with that release?

Azymn
07-30-2002, 10:40 PM
Thanks for the list - i was hoping someone would get this file done right.

remark 666
07-31-2002, 05:21 AM
yes he is but I've spoken to him and I think he already has his own list and it's similar to this but if he uses some of those numbers then credit will be given where credit is due

t3rr0r
07-31-2002, 08:08 AM
you're off on some of the numbers, ie. cheshire_vader (1.12). you rounded where rounding was not needed, on occasion. :tsk: and why is aayla so tall? :confused:

keo718
07-31-2002, 09:35 AM
you're off on some of the numbers, ie. cheshire_vader (1.12). you rounded where rounding was not needed, on occasion.

As I stated, I rounded off to the nearest tenth. Meaning Darth Vader is closer in height to 1.13 than he is to 1.12. If three numbers were allowed after the decimal in Dests' Jedimod, I would make him his exact height of 1.126.

and why is aayla so tall?

Unless Im mistaken, Aayla is a twilek. Twilek's are listed at 2 meters. Darth Vader is listed as 2.02 meters. You get the picture.

you're off on some of the numbers

Do the math, I'm not off on any numbers.

Zey
07-31-2002, 10:20 AM
Take a breath and carm down :p

Looks really good mate... well done

keo718
07-31-2002, 11:51 AM
If your referring to me, I am simply responding to his post. No one is angry.

t3rr0r
07-31-2002, 11:56 AM
darth vader is 2.02m, therefore his height would be 1.12222(and so on). (1/1.8)*2.02=1.12(rounded)

keo718
07-31-2002, 01:25 PM
If you do the math correctly, 2.02 meters translated into the tckmodel.cfg scale= 1.126, which rounds off to 1.3.

t3rr0r
07-31-2002, 01:59 PM
Originally posted by keo718
If you do the math correctly, 2.02 meters translated into the tckmodel.cfg scale= 1.126, which rounds off to 1.3.
(1/1.8)*X = the correct math.

Arkum
07-31-2002, 02:37 PM
I can't find tckmodel.cfg, where is it?

Master Burner
07-31-2002, 04:29 PM
its in the mod folder in the gamedata folder... so if you don't have the JediMod or JediMod++ you don't have it :-\


erh why is Yoda so small??
nobody would have a chance against that size...

keo718
07-31-2002, 04:48 PM
(1/1.8)*X = the correct math.

If you have the correct math then you can easily do your own list. Your not forced to use mine. :)

keo718
07-31-2002, 09:41 PM
I can't find tckmodel.cfg, where is it?

Its in your gamedata/jedimod folder.

MUHAHAHAHAHA
08-01-2002, 02:05 AM
Yoda's height will not be accurate because of the way the mesh fits the skeleton (if you don't believe me, load him up w/out JediMod and compare to kyle). 0.37 is too small. I'd say 0.44 is about right, but it's hard to tell... Perhaps getting a measure of the mesh vs. Kyle's mesh would be a good way...

MUHAHAHAHAHA
08-01-2002, 02:08 AM
Oh and another thing....
I'm working on changing the code that reads tckmodel.cfg to use dynamic memory allocation, so the 1024 character limit won't be there. Now if only I can fix all these argument size/mismatch warnings... (I'm trying to clean up the code so there are 0 warnings and errors - found a few compiler errors in the UI code, where a few things weren't defined in the .h files... )

I'll keep you guys updated.

keo718
08-01-2002, 09:43 AM
Yoda's height will not be accurate because of the way the mesh fits the skeleton

Can you elaborate a little? I'm not sure I understand.

I'm working on changing the code that reads tckmodel.cfg to use dynamic memory allocation, so the 1024 character limit won't be there.

Excellent. That is exactly what we need.

striderx2048
08-01-2002, 11:31 AM
while your working on the code,
how about moving the "norma;" saber color selction somewhere else then on top of the hilt selection?

Azymn
08-01-2002, 02:06 PM
quote:
--------------------------------------------------------------------------------
(I'm trying to clean up the code so there are 0 warnings and errors - found a few compiler errors in the UI code, where a few things weren't defined in the .h files... )
--------------------------------------------------------------------------------

Muhaha - i think i ran into the same problem. Inside the new jedimod1_1.pk3\ui folder there's a file called menudefs.h - if you copy it over the menudefs.h in your Game\ui folder (i think that's where it was - it's above the code directory anyway) then the ui portion will compile correctly, as the HILT_FEEDER and SABER_??????1 and 2 ar now defined correctly, assuming you had the same problem.

Darth Xhan
08-03-2002, 02:20 AM
Covenant Elite : 1.55 1.2 (Plasma Sword)

1.9 for Trebor? No way.. that makes him the size of a small Rancor. He was barely taller than Fett, like by three/four inches. Look at his second pic on the database.

A Covenant Elite would range from 8-9.5 feet, way taller than Coleman.. unless there some x/y/z mojo you're leaving out...

keo718
08-03-2002, 10:59 AM
Thanks for pointing that out, that was a typo. Coleman Trebor = 1.19

NemoX
08-04-2002, 02:05 PM
What would the height be for yuzhanvong?

keo718
08-04-2002, 08:14 PM
What would the height be for yuzhanvong?

They are the default height of 1.0. So whether or not you put them in that file they are the correct height.