PDA

View Full Version : Doors


XSeth2kX
12-08-2002, 10:41 PM
If you’re facing degree 180, and the door is defined to slide at 270. You can move your entity window around a bit to get an exact view if need be to see which direction your door will slide.


How do i find out which angle my door is facing and what angle to slide it at?

Takeoffyouhoser
12-09-2002, 01:00 AM
just open up the N key menu.
the way the numbers are set in that key are the way they should be aplied in the grid.

here's an example to help you out.

1) Make a door.
2) stand infront of that door, in editor.
3) Now, are you facing up, down, left, or right in editor.

facing up is 90
down is 270
left is 180
right is 360

Now, if you want your door to open to the left, your going to select 180. if you want it to open right, select 360.


now, lets say you have another door, and standing infront of the door, you notice that you are facing the right side of the screen. your door is at 360. to make it open left, select 90.

to make your door open up or down, use the up or dn tag.

thats it!!