Vid card help please

[Taarkin]

If it makes anyone feel better, my current PC is 166mhz.

------------------
Was I supposed to eat the heads too? 'Cause I took nooo prisioners!

Once again, evil is defeated through the use of decorative agricultural technology!

Official forum Psychic

[K_Kinnison]

ARRRRRRRRRRRRRRRRRRRRRRRGGGGGGGGGGGGGHHHHHHHHHHHHH JUST WONT WORK!!!!!! *starts going "wookie" on his comuter*

[JR2000Z]

Alright GUNNER,give us yer computer specs.

[Andromeda]

*laughs* K_K you're funny

and for all the rest of you, can you say it's all greek to me? i think the computer i'm on now (my parents) is like a 200mHz, and mine upstairs is i think a 400mHz, and it has 64mb of RAM, and 2 gigs of somethin else, but i dont' know what that's about all i know about em...my computer upstairs doesn't even have a modem right now it has an ethernet card, but that does me no good at home...

------------------
If you live to be a hundred, i hope i live to be a hundred minus one so i never have to live without you!
SkirtPower@hotmail.com

Official Forum Chick

[GUNNER]

Well , lets see....

I have a PIII 700 overclocked to 933mhz(turned up the FSB to 133)MSI slocket and Golden orb cooler ,an Abit BE6 mobo, 128mg Mushkin PC133 CAS2 Rev 1.5 with Mosel Vitalic chips ,32mg Geforce GTS2, two WD 13.6gig 7200RPM ultra/dma HDDs,Diamond mx300 sound card,creative 52x cd-rom,intel 10/100pro nic,netgear 10/100 nic, Addtronics case w/5 fans. cambridge sound works FPS2000 speakers, 19 inch sylvania monitor.
Almost forgot, I "rounded" all my IDE and floppy ribbon cables too, the ATA/66 was to small to do, and the wrapped them in red wire loom.

the wife has a PIII 550 katmai , 128mg corsair PC100,voodoo 3 2000, HP burner, WD 10gig HDD, SB live sound, intel 10/100pro nic,17 inch sylvania.

Got me a P200 also. and SETI also runs on my parents PIII 600.

Thants about it, except the wife just got a new Dell PIII 800 lap top. It from her work ,so no seti.

[This message has been edited by GUNNER (edited December 07, 2000).]

[Taarkin]

Although my chances of getting that new computer are dwindling, I think I should be prepared anyway. Nameley, how to set it up. Is there a faster way to copy stuff over besides painstakingly coplying each little thing onto a disk and then onto the new PC?

------------------
Was I supposed to eat the heads too? 'Cause I took nooo prisioners!

Once again, evil is defeated through the use of decorative agricultural technology!

Official forum Psychic

[Poor Bastard]

Originally posted by Taarkin:
Is there a faster way to copy stuff over besides painstakingly coplying each little thing onto a disk and then onto the new PC?

Painstakingly upload each little thing to the NET and then download it all again.

------------------
You know one thing that will really make a Jedi mad? Just run up and kick him in the ass...

[Nute Gunray]

one word: network

------------------

I'm convinced solar energy is a Communist conspiracy

[This message has been edited by Nute Gunray (edited December 08, 2000).]

[Keyan Farlander]

Get a tape drive. That gotta be the best way. Unless you only have a few hundred megs of stuff - you might want to go with a zip drive in that case.

[Zargon]

CD-R

[Nute Gunray]

Network and then hide all your <s>PR0N</s> files behind numerous passwords

------------------

I'm convinced solar energy is a Communist conspiracy

[Admiral Zaarin]

What about DCCing?

What a load of wankers
What a load of wankers
What a load of wankers
What a load of wankers
What a load of wankers
What a load of wankers
What a load of wankers
What a load of wankers
What a load of wankers
What a load of wankers
What a load of wankers
What a load of wankers
What a load of wankers
What a load of wankers
What a load of wankers
What a load of wankers
What a load of wankers

AnD We AlL FaLl DoWn
DoN'T AsK 4 ThE ObViOuS

[K_Kinnison]

Anyone want a $150.00 potato chip?

E-mailed the computer Tech support ppl ,they told me to disabel something.. which i did, and when i told them it did not work they said I was wrong it should work. what happened to the customer is allways right? dam fricking SOB basterds

E-mailed 3dfx.. no reply, dam ingranful mother sucking pimp smegheads with smeg up thier butt from getting it from the smeggging smegged smegheads of their dads

[Poor Bastard]

This thread is pure comedy...

------------------
You know one thing that will really make a Jedi mad? Just run up and kick him in the ass...

[JR2000Z]

You guys think that you all great and rich huh?I have my own computer that will cruch your hopes.

66 mgz
Sound blaster Pro
Windows 3.1
AND a disk drive

I'd better stop now so you guys wont beat me due to servere jelousy.

[K_Kinnison]

I GOT YA BeAT!!!

let me get the dust off of it first...

TRS-80 Tandy Color computer I
64k Ram
60 Key keyboard
Analog joystick with 1 button.
Cassette player (how i load programs)
13 inch Color TV

[Admiral]

so I have a system that is older then I am.

------------------
"Dulce bellum inexpertis."
(Sweet is war to those who have never experinced it.) Roman Proverb

[Nute Gunray]

Originally posted by K_Kinnison:
I GOT YA BeAT!!!

let me get the dust off of it first...

TRS-80 Tandy Color computer I
64k Ram
60 Key keyboard
Analog joystick with 1 button.
Cassette player (how i load programs)
13 inch Color TV

I've got a Tandy 1000rs under my bed. It's got 512k RAM. In your FACE.


------------------

I'm convinced solar energy is a Communist conspiracy

[JR2000Z]

I never win.

[JR2000Z]

Or loose.

[JR2000Z]

Or loose.

[Taarkin]

Or double post

------------------
Was I supposed to eat the heads too? 'Cause I took nooo prisioners!

Once again, evil is defeated through the use of decorative agricultural technology!

Official forum Psychic

K_K....... You open up control panel, the system icon in there, the devices tab then, then left click and select properties on your old video card. In the old card settings select "disable hardware" thats what hewlett-packard told me after I had figured it out on my own... also in you BIOS you will want to find your PCI card settings and be sure to enable the PCI as a masterbus slot or something to that effect, sorry I can't be more in depth about the BIOS its just that every BIOS company designs their BIOS differently.... I believe to access your BIOS you must hit the F1 or delete key when your comp starts up

------------------
OMEGA_ALISTAIR
admiral_alistair@hotmail.com
OMEGA Commander
OMEGA Chief Engineering Office
http://omega.clanpages.com

[K_Kinnison]

okay... im calling to 3dfx support

"esitmated hold time 33 minutes and 16 seconds"

OMG!!!!

[Nute Gunray]

I called AOL's tech support once, the ONLY time I ever contacted tech support. They said I was going to be waiting for over 6 hours I got help in 56 minutes. Apparently everyone else stopped waiting...

------------------

I have a life, but I feel mostly dead.

[Taarkin]

The only time I called tech suppor was Hasbro because the Spider Man toy I brought didn't work. They never called back

[Poor Bastard]

HAHA.

------------------
You know one thing that will really make a Jedi mad? Just run up and kick him in the ass...

[K_Kinnison]

Well i fianlly got it fixed.. Fortunatly the guy i talked to foramlly worked for the scanner company I have a scanner for.. the KEYBUGCHECKEX error was specific for the scanner.

Un-plgged the scanner nad everythign worked just fine.

Now i got to find out why it wont give me resolution above 800x600

[JR2000Z]

Even I couldnt figure that out.
I had a cool Spiderman that I got at 7th grade.I tried to keep it mint condition but I opened it and played with it.Then I broke it.

[K_Kinnison]

anyone else use VOoDOo?

[Rogue Nine]

My cousin got himself a Voodoo 5. Pretty durn sweet if you ask me.

[JR2000Z]

I have a Voodoo2 Banshee.Should I upgrade to a Voodoo 5?

[Rogue Nine]

I'd say go ahead. Those graphics are nice. Makes me wish I could afford it.